Operator's Manual – Stacker Vendor
©
LAI GAMES
Page 18
P04 = COIN MECH 2: NUMBER OF COINS PER CREDIT
(Default 01) (Adjustable 1 – 10)
This variable sets the number of coins that need to be inserted into coin
mechanism 2 for each credit. It can be set to 1, 2, and 3… to 10 coins for one
credit. The default setting is “1” this means that 1 coin per credit.
P05 = COIN MECH 2: NUMBER of PLAYS PER CREDIT
(Default 01) (Adjustable 1 – 10)
This sets the number of games for each credit inserted into coin mechanism 2. It
can be set to 1, 2, and 3… to 10 plays for each credit. The default setting is “1”
this means that 1 credit per play.
P06 = COIN MECH 2: NUMBER of COINS for BONUS CREDIT
(Default ON or OFF) (Adjustable ON – OFF)
This variable sets the multiple bonus credit activation by 3 levels on coin
mechanism 2. It can be set to ON or OFF. The default setting is “OFF” this mean
the multiple bonuses is disable, if the setting change to ON the multiple bonus
setting will be open the P06-1 setting and so on.
P06-1 = COIN MECH 2: NUMBER of COIN per BONUS
CREDIT on LEVEL 1
(Default OFF) (Adjustable OFF – 99)
This variable sets the number of coins that need to be inserted into coin
mechanism 2 for bonus credit. It can be set to either OFF, 1, 2… to 99 coins for
bonus credit; the default setting is “OFF” this mean that the
P06-2 will not open.
P06 -2 = COIN MECH 2: NUMBER of BONUS CREDIT per
COIN on LEVEL 1
(Default OFF) (Adjustable OFF – 99)
This variable sets the number of bonus credit that will be given on every coin
inserted in coin mechanism 2 on level 1 multiple bonus for bonus credit. It can be
set to either OFF, 1, 2, 3… to 99 bonuses per coin; the default setting is “OFF”
this mean that the
P06-3 will not open.
P06-3 = COIN MECH 2: NUMBER of COIN per BONUS
CREDIT on LEVEL 2
(Default OFF) (Adjustable OFF – 99)
This variable sets the number of coins that need to be inserted into coin
mechanism 2 for bonus credit. It can be set to either OFF, 1, 2… to 99 coins for
bonus credit; the default setting is “OFF” this mean that the
P06-4 will not open.