Operator's Manual – Stacker Vendor
©
LAI GAMES
Page 13
RUN TEST
ENTER The Run Test can be entered by pressing the Test button once while in
the Switch Test or by pressing the Test button three times while in
Attract mode,
r
r
r
r
will be displayed on the 4-digit display.
SELECT The Service button is pressed once to start the run test mode. The
credit display will indicate,
r
-
0
1
the first Minor Prize Arm and
also flashing the indicator LED. The Service button is then pressed
again to step through each prize arm, flashing the indicator LED of the
current prize arm.
RUN The Start/Stop Button will activate motor of the current selected prize
arm as long as the button is held.
EXIT The Run Test is exited into Programmable Adjustments Mode by
pressing the Test Button once.
PRIZE ARM LOCATION DIAGRAM
1
2
3
4
5
6
7
8
9
10
PRIZE ARM NUMBER
& LOCATION
To Next Page
Loading...
Need help?
General
