57
19.15 • SOFTWARE UPDATE
19.15
• The update should be carried out by
an authorised technician.
Press the MENU button 13, turn knob 16
until “Settings” is displayed and confirm by
pressing knob 16.
Select “Software Update” and press knob 16
to confirm.
Remove the USB port cover. Insert the USB
key in the USB port on the oven.
Select “START” by turning knob 16 and
confirm by pressing knob 16.
The update starts, when the message below
appears, press knob 16 to complete the
update.
When the program has finished, disconnect
the power supply to the oven by turning off
the switch upstream of the device without
removing the USB key.
Switch the oven on again and wait until the
update is completed.
CAUTION: After removing the USB key, put
the cover back in place.
19 • SETTINGS
90034270rev02
To Next Page
Loading...
Need help?
General