EasyManua.ls Logo

Lainox SAPIENS SAEB071 User Manual

Lainox SAPIENS SAEB071
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
90027911rev04
EN
CAUTION: Read the instructions
prior to using the equipment
INSTALLATION AND
MAINTENANCE MANUAL
NABOO
SAPIENS
AROMA NABOO
AROMA SAPIENS
Question and Answer IconNeed help?

Do you have a question about the Lainox SAPIENS SAEB071 and is the answer not in the manual?

Lainox SAPIENS SAEB071 Specifications

General IconGeneral
ModelSAPIENS SAEB071
Capacity7 x 1/1 GN
Control TypeDigital
Power SupplyElectric
Voltage400 V
Frequency50/60 Hz
Control PanelTouchscreen
TimerYes
Programmable MemoryYes
Interior LightingYes
Shelves7
TypeCombi Oven
Temperature Range30°C to 300°C
DoorDouble Glass Door
Power Supply Details400V 3-phase

Summary

Special Requirements for Installation Site

Ventilation and Gas Installation Requirements

Ensures proper room ventilation and adherence to gas installation regulations for safe operation.

Electrical Isolation Switch Requirements

Specifies the need for a multi-pole isolating switch with a minimum contact gap.

Gas Supply Plumbing Standards

Mandates installation of gas plumbing according to current regulations and type-tested shutoff valves.

Statutory Requirements, Technical Regulations and Directives

Positioning

Electrical Connections and Equipotential Bonding

Type Y Attachment and Power Connection

Details the requirements for connecting the oven's Type Y attachment to the power supply.

Water and Drain Connections

Washing Systems

Calout (if present)

Installing Ovens with Calout Device

Instructions for connecting ovens equipped with the Calout device.

Gas Connection Procedures

Gas Connection Requirements

Details gas pipe selection, connection type, and shutoff valve requirements.

Operating at the Rated Heat Output

Burner Performance Testing and Adjustment

Guides on checking and adjusting burner fan speeds and operating parameters.

Combustion Analysis and Gas Settings

Instructions for checking CO/CO2 values and adjusting gas settings for optimal combustion.

Commissioning and Testing

Post-Connection Installation Checks

Verification of appliance and installation integrity, connections, and safety features.

Important Information for the User

Authorized Service Agent Requirement

Stresses that all repairs and maintenance must be performed by authorized personnel.

Related product manuals