EasyManua.ls Logo

Lainox SAPIENS SAEV201 - User Manual

Lainox SAPIENS SAEV201
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
90027911rev04
EN
CAUTION: Read the instructions
prior to using the equipment
INSTALLATION AND
MAINTENANCE MANUAL
NABOO
SAPIENS
AROMA NABOO
AROMA SAPIENS
Question and Answer IconNeed help?

Do you have a question about the Lainox SAPIENS SAEV201 and is the answer not in the manual?

Lainox SAPIENS SAEV201 Specifications

General IconGeneral
BrandLainox
ModelSAPIENS SAEV201
CategoryOven
LanguageEnglish

Summary

Technical Data

General Data - Electric Ovens

Details specifications for electric oven models, including voltage, power, and cable size.

General Data Gas Ovens

Details specifications for gas oven models, including gas power, connection, and motor.

Special Requirements for the Installation Site

Positioning

Electrical Connections and Equipotential Bonding

Type Y Attachment and Cable Requirements

Outlines type Y attachment, cable needs, terminal board access, and cable feeding for safe electrical connection.

Equipotential Bonding and Safety Measures

Explains equipotential bonding for safety and procedures for damaged supply cords.

Points to Remember When Making the Electrical Connection

Water and Drain Connections

Water Pressure and Steam Generator Hookup

Details required water pressure, hookup for steam generators, and water hose specifications.

Draining System and Connection Methods

Combiclean Detergent Cartridge Setup

Calfree Descaler Cartridge Setup

Replacing Combiclean Detergent Cartridge

Replacing Calfree Descaler Tank

Replacing Calfree Descaler Cartridge

Setting Combiclean;Calfree Cartridges;Containers

Gas Connection Procedures

Gas Connection and Leak Testing

Covers gas pipe selection, shutoff valve installation, and methods for leak testing connections.

Installation Type B13 Flue Gas Extraction

Installation Type B23 Flue Gas Extraction

Operating at the Rated Heat Output

Chamber Burner Checks

Burner Parameter Adjustment and Display

Burner Function Testing and Operation Control

Checking Heat Capacity via Settings Menu

Burner Selection and Value Modification

Testing Burner Functionality and Cycle Exit

Combustion Analysis and Gas Conversion Procedures

Burner Management Screen Operations

Commissioning and Testing

Pre-Installation and Connection Checks

Lists checks for appliance and installation, protective film, vents, connections, safety, leaks, and drainage.

Initial Operation and System Verification

Covers lighting the oven, checking burner ignition, silicone joint leaks, and refitting panels.

Performance Testing and Acceptance

Includes gas consumption measurement, test report completion, and warranty start.

Installation Diagrams

Related product manuals