Lainox Compact by Sapiens - User Manual

90028111rev03
Compact by Sapiens
CAUTION: Read the instructions
prior to using the equipment
USER’S MANUAL
COMBINATION OVEN
WITH DIRECT STEAM AND
WITH STEAM GENERATOR
Sapiens
EN

Lainox Compact by Sapiens Specifications

General

Category	Oven
Model	Compact by Sapiens
Control Panel	Digital
Power Supply	Electric
Brand	Lainox
Temperature Range	30°C to 300°C
Material	Stainless Steel
Capacity	6 GN 1/1

Summary

General Warnings

Points to Remember

Description of Keys

Cycles (Key 1)

Convection (Key 2)

Steam (Key 3)

Combi (Key 4)

Fan Speed (Key 5)

Recipes (Key 6)

Core Probe (Key 11)

Activates the core probe cooking setting for internal food temperature monitoring.

Automatic Humidity Control Key (Key 12)

Controls automatic humidity, useful for foods requiring added moisture.

Main Switch - Start;Stop (Key 15)

Activates the control panel, starts, stops, or temporarily stops cooking.

Rapid Cooling Key with Oven Door Open

Manual Settings for One-Phase Cooking

Cooking Mode Selection

Steps to select the desired cooking mode (convection, steam, combi).

Set the Temperature

Instructions on how to set the oven temperature using the control knob.

Set the Time

Procedure to set the cooking time or infinite time.

Set Core Probe

Reference to the section for setting the core probe temperature.

Manual Settings for Cooking with Up to 4 Cycles in Sequence

Switch On

Procedure to switch on the appliance and check for initial anomalies.

Select

Steps to select the cooking mode for each cycle.

Set the Temperature of Cycle 1

Instructions to set the temperature for the first cooking cycle.

Set the Time for Cycle 1

Procedure to set the cooking time for the first cycle.

Set the Core Probe for Cycle 1

Reference to the section for setting the core probe for the first cycle.

Select Cycle 2 and the Following Ones (Up to 4 Cycles)

Steps to select cooking modes and settings for subsequent cycles.

Setting a New Cooking

Saving the Cooking Mode

Start

Procedure to start the multi-cycle cooking program.

End of Cooking

How to stop the multi-cycle cooking program or what happens upon completion.

Entering and Saving a Program

Switch On the Oven

Select the Program

Select

Set the Temperature of Cycle 1

Set the Time of Cycle 1

Set the Core Probe for Cycle 1

Select Cycle 2 and the Following Ones (Up to 4 Cycles)

Saving the Program

Selecting and Starting a Saved Program

Switch On

Retrieve

Start

Setting the Core Probe

Cooking with Core Probe

Guide to using the core probe for temperature-controlled cooking.

One-Phase Manual Cooking

Steps for using the core probe in a single-phase manual cooking process.

Multi-Phase Manual Cooking

Steps for using the core probe in a multi-phase manual cooking process.

A Program to be Saved

Procedure for saving a program that utilizes the core probe.

Examples of Core Temperatures

Automatic Humidity Control System

Cooking with the Automatic Humidity Control System

One-Phase Manual Cooking

Multi-Phase Manual Cooking

A Program to be Saved

Operating Details

Displaying Settings During Cooking Phase (without stopping)

Changing the Settings During the Cooking Phase (without stopping)

Temporary Stop

Permanent Stop

Routine Maintenance

Periodically...

Prolonged Disuse

Non-Routine Maintenance

To ensure correct and safe operation

With this in mind, customers are recommended to sign a service agreement

CALOUT (if present)

Executing the CALOUT Cleaning Cycle

Step-by-step guide to perform the CALOUT limescale cleaning cycle.

HC CAL - HPC CAL (if present)

Attivazione del Ciclo HC CAL O HPC CAL

Procedure to activate the HARD CAL or HARD PLUS CAL cleaning cycles.

Manual and Automatic Cleaning

Manual Cleaning

Executing the Manual Cleaning Cycle [CL]

Step-by-step guide to perform the manual cleaning cycle.

Washing Kit

Executing the Automatic Cleaning Cycle [riS] - [SC] - [HC] - [HPC] - [HPC ECO]

Cartridge;Container Replacement for COMBICLEAN DETERGENT

Cartridge;Container Replacement DESCALER

Solid Clean Detergent Creation

Solid Cal Descaler Creation

Descaling the Boiler (if present)

Activation of de-scaling cycle [dE]

Procedure to activate the steam generator de-scaling cycle.

Self-diagnosis and Fault Identification

Main Fault Warning Messages (Page 50)

Lists error codes like Err SC, Err Sb, Err Sd, Err SP and their meanings.

Main Fault Warning Messages (Page 51)

Lists error codes like no H2o, Er 1, Er 2, Er 3, Er 7, Er 8, doP and their meanings.

Main Fault Warning Messages (Page 52)

Lists error codes like Err dEt, Err L1-L3, dE End, CAL End, no drn, drn err, NO bol and meanings.

Main Fault Warning Messages (Page 53)

Lists error codes like Err Cd1-Cd5, Err CC1-CC3, Err Fd8, Err FC8 and their meanings.

Main Fault Warning Messages (Page 54)

Lists error codes like Att OFF, no GAS, Err Fbc-Fbb, Err brx and their meanings.