37
Press Recipe button 6,
[ACC] appears on display 7. Turn the knob
8 to the left until you see [SPC] and press
control 8 to confirm.
Turn the knob 8 until you see [CALOUT] on
displays 7 and 9 and press button 15.
The program ends when you see [End] on
display 9. Press button 6 to exit the [CALOUT]
program.
ATTENTION (20GN1/1 - 20GN2/1): Make
sure the Limescale removal connector is firmly
attached and that there is sufficient Limescale
removal liquid in the can.
USE ONLY THE “SOLID CAL/CALFREE”
LIMESCALE REMOVAL PRODUCT
SUPPLIED BY THE PRODUCER.
SPECIAL PROGRAMS
22 • CALOUT (if present)
6
15
7
8
9
22.1 •
EXECUTING THE CALOUT CLEANING CYCLE
To Next Page
Loading...