38
SPECIAL PROGRAMS
23 • HC CAL - HPC CAL (if present)
Press Recipe button 6,
[ACC] appears on display 7. Turn the knob 8
to the left until you see [SPC] and press the
knob 8 to confirm.
Turn the knob 8 until you see [HC CAL] on
display 7 and 9 and press button 15.
T
he display shows [rAF] if the oven
temperature is high, [Att] if the oven
temperature is too low.
ATTENTION: Make sure the Limescale
removal connector is firmly attached and that
there is sufficient Limescale removal liquid in
the can.
USE ONLY THE “SOLID CAL/CALFREE”
LIMESCALE REMOVAL PRODUCT
SUPPLIED BY THE PRODUCER.
The program ends when you see [End] on
display 9. Press button 6 to exit the program.
6
15
7
8
9
23.1 •
ATTIVAZIONE DEL CICLO HC CAL o HPC CAL
Foreword
If the oven offers automatic cleaning (on request), you can choose to execute the CALOUT limescale
removal cycle together with the HARD or HARD PLUS automatic cleaning cycle ([HC CAL] or
[HPC CAL] cycle)
To Next Page
Loading...