33
19 • SETTING THE DATE AND TIME
OPERATIONS
19.1
•
With the appliance live and display off,
press button 6, the display 7 shows [USb],
turn knob 8 until [tIM] is displayed, press
the knob to confirm the selection.
• Setting the hour
The display 7 shows [h], and display 9
shows the time set.
Turn the knob 10 to modify the hour
• Setting the minutes
Turn the knob 8 again, display 7 shows
[Min] and display 9 shows the minutes set.
Turn the knob 10 to modify the minutes
• Setting the day
Turn the knob 8 again, display 7 shows
[dAY] and display 9 shows the day set.
Turn the knob 10 to modify the day
• Setting the month
Turn the knob 8 again, display 7 shows
[Mon] and display 9 shows the month set.
Turn the knob 10 to modify the month.
• Setting the year
Turn the knob 8 again, display 7 shows
[YEA] and display 9 shows the year set.
Turn the knob 10 to modify the year
Once the date and time has been set,
press button 6 to memorise the values.
.
OPERATIONS
20 • DOWNLOAD HACCP LOG
20.1
•
With the appliance live and display off,
press button 6, the display 7 shows [USb],
turn knob 8 to confirm the selection
The display 7 shows [hAC].
Loosen the protection screws of the USB
port until the protective plate is rotated
by 90° in order to have access to the USB
port. Insert the pen drive into the oven USB
port.
Press the knob 8 to confirm the selection.
When download has been completed, the
displays 7 and 9 show [USB END]
ATTENTION: When the USB pen drive has
been removed, reposition the protective
plate and tighten the protection screws.
If the USB pen drive is not inserted, the
displays 7 and 9 show [USB Err].
Insert the USB pen drive and press knob 8
to repeat the procedure.
To Next Page
Loading...