lamber F92-dy - Page 55

USER TECHNICAL-CONFIGURATION PROGRAMMING
Push-button
"+" and push-button enter "D" for 5 second with the machine FF and hood open
cod. PIN 1000
To view the
Unit of measure °C
To confirm temperatures during
°F washing cycle
press push-button
Rinse P1
To modify After 3 seconds came back
(22÷90°C) P2
the values press standard
P3 viewing
P4 For temperatures
back
and after "+" and "-" fixed for the entire cycle
Temperature Cycles of washing press
Washing P1 push-button
(22÷70°C) P2
P3 for 3 seconds
P4
back
back
Washing P1
To modify
(10÷1200") P2 the values press
P3
Infinite
(0÷900") P4
and then "+"and "-"
back
Cycle duration
Rinsing P1
(0÷60") P2
P3
P4
back
back
Repeat P1
To modify
(1÷50) P2 the values press
P3
Cycle Repeat P4
back
and then "+" and "-"
back