15
DESCALING
When hard water is used you can find, inside the machine and also on objects,
calcareous sediments which must be removed both for hygienic and operating reasons
by a descaling operation.
Operating process and frequency of this intervention are suggested by your cleansing
agent supplier who has suitable products, generally containing phosphoric acid.
In order to avoid damage to the machine do not increase the quantities and once
operations end rinse abundantly.
HYGIENE
At last each 30 days it would be useful to do this operation which guarantees the
complete hygienic conditions of the machine. We suggest to contact your cleansing agent
supplier who will give you quantity and name of the most suitable product you can use
and that, generally, is an active chloride powder (100÷200 ppm).
In order to avoid damage to the machine do not increase the quantities and once
operations end, rinse abundantly.
To Next Page
Loading...
Need help?
General
