56
In order to do this use a fitting with non-return valve.
To connect the dispensers there are four light blue terminals “D”, marked with apposite
labels, which are energized when the pump is working. To avoid damages to the electrical
components it is compulsory to use these terminals and avoid movable connections in
other points of the plant.
Terminal voltage corresponds 230V.
Note: In order to let cables pass, please use the labelled wire clamp behind the electrical
control box.
WARNING: Danger to life due to live components!
During all electrical operations, disconnect the machine from the network and verify the absence of power.
The machine and its accessories must be connected in accordance with local regulation, by a company that is
specialized in electrical installation authorized by the competent authorities.