66
10.3 - MATIC PARAMETERS’ DESCRIPTION
Description Parameter functioning
Language Select the language to use: Italian-French-English-German-
Spanish.
Pre-rinsing (Yes-No) Select YES only for machines with pre-rinsing. This function can be
activated or not by pressing ‘’P’’ button.
Pre-rinsing Start 1 (0-240s) a: (for machines with Pull-through rack) lag at the pre-rinsing pump
start from the moment of the basket contact with the rinsing
economizer at the first speed .
b: ( for Belt-towing machines) lag at the pre-rinsing pump start from
the moment of the basket or dish passage between the entry’s
photoelectric cells at the first speed.
Pre-rinsing Start 2 (0-240s) a: (for machines with Pull-through rack) lag at the pre-rinsing pump
start from the moment of the basket contact with the rinsing
economizer at the second speed .
b: ( for Belt-towing machines) lag at the pre-rinsing pump start from
the moment of the basket or dish passage between the entry’s
photoelectric cells at the second speed.
Pre-rinsing duration 1 (0-240s) a: (for machines with Pull-through rack) lag at the pre-rinsing pump
stop from the moment of the exit of the basket contact with the
rinsing economizer at the first speed.
b: (for Belt-towing machines) lag at the pre-rinsing pump stop from
the moment of the dish or basket exit from the entry’s photoelectric
cells at the first speed.
Pre- rinsing duration 2 (0-240s) a: (for machines with Pull-through rack) lag at the pre-rinsing pump
stop from the moment of the basket contact with the pre-rinsing
economizer at the second speed.
b: (for Belt-towing machines) lag at the pre-rinsing pump stop from
the moment of the dish or basket exit from the entry’s photoelectric
cells at the second speed.
Drying (Yes-No) Select YES only for machines with drying tunnel. This function can
be activated or excluded by ‘’O’’ button.
Heat pump (Yes-No) Select YES only for machines with heat pump. This function can be
activated or excluded by ‘’Q’’ button.
Flow-meter (Yes-No) Select YES only for machines with flow-meter. It checks the rinsing
water quantity. Lamp ‘’M’’ is lighted up when the rinsing functioning
is regular; when the water quantity is inadequate lamp ‘’M’’ flashes
and the display shows ‘’RINSING ALERT’’.
Speed (1-2) Select -1- for machines with only one speed and select -2- for
machines with two speeds. ‘’E’’ button allows to select the
conveyor’s or belt-towing ’s speed. The corresponding lamp ‘’F’’ will
be lighted up.
Autotimer (0-20min) Only for machines with autotimer. Select a time from 1 to 20 minutes
to activate it. This function anyway can be activated or excluded by
‘’R’’ button.
It stops the machine after the selected time from when the last
basket or dish has passed by the rinsing economizer.
Boiler filling (0-10min) At every daily start, before filling the tanks, the rinsing system is
activated to guarantee the water presence in the boiler. Regulate the
time according to the single needs or boiler dimensions.
Tank filling stop (0-60s) Time during which the tank filling has to continue after having
reached the level of the level switch to reach immediately the
optimal functioning level.
Tank filling alert (0-60min) Maximum time for the tank filling, after which the machine stops and
To Next Page
Loading...
Need help?
General
