9
&
NOTE: Ensure hoses
are not kinked or
trapped behind the
dishwasher.
5 - Protection strip for timber worktops to avoid condensation damage
6 - Positioning the dishwasher
NOTE: If necessary loosen and
rotate the water hose towards
the water supply and re-tighten.
Always use the new hose
supplied with the dishwasher.
Ensure a clean and
dust free surface. Cut to fit.
NOTE: This strip must be fitted to timber worktops to
avoid damage. Ensure protection strip is set to edge
of square edged worktops.
Push machine
back and pull
hoses through.
Set the desired width
Adjust side
spacer fixings
To Next Page
Loading...
