183
7 Operating Control and Displays
Submenu ‘Firing rate controller parameters’
Fig. 7-59 CMS firing rate parameter
Setting and changing values
1. Enter the values numerically
Alternatively: Set the values with the up/down arrow keys
2. Confirm the values with the ENTER-key or chose another parameter.
NOTICE
Only parameters of the current access level can be changed.
All parameters which are not in the current access level have a grey background and cannot
be changed. Depending on how a parameter is changed, a RESET is mandatory. This is indi-
cated by a message.
1 Enter the password (padlock symbol)
To Next Page
Loading...
