Lamtec CMS User Manual

226
8 CO/O
2
Control
Affected parameters
P100 = Type of O
2
trim
P101 = Activation of the O
2
trim
P109 = Bit pattern of the curve set
P120 = Offset value of excess air for inactive CO/O
2
control
P121 = Offset value of excess air for air deficiency
3 O
2
trim is inactive
Measured O
2
value is indicated.
4-7 inactive
8 The correction value for an inactive control is preset.
9 The correction value for air deficiency is preset.

Lamtec CMS Specifications

General

Brand	Lamtec
Model	CMS
Category	Control Systems
Language	English