3
1 General Information
1 General Information
1.1 Validity of these Instructions
This instructions apply to the Combustion Management System FMS 4 and FMS 5 in any con-
figuration.
The software-related information relates to software version v5.8. The software version can
be found on the label of the programme EPROM. In case of doubt ask the LAMTEC Service
- phone: +49 (0)6227 6052-33 or email: support @lamtec.de
If you use another software version as the version mentioned above, some of the described
functions may not be available or some function which are available with your software version
may not be described in this manual.
The devices conform to the following standards and regulations:
European directives:
Harmonised European standards:
Application standards:
NOTICE
Respect the national safety regulations and standards.
2014/30/EU Electromagnetic Compatibility (EMC)
2014/35/EU Low Voltage Directive
(EU)2016/426 Appliances Burning Gaseous Fuels
2014/68/EU Pressure Equipment Directive, conformity assessment categories IV
module B and D
DIN EN 298: 2012-11
DIN EN 1643:2014-09 Integrated leakage check, gas line DIN DVGW PÜZ
N6-2510 ASO 324
DIN EN 12067-2:2004-06
DIN EN 13611:2011-12
DIN EN 60730-2-5: 2015-10
DIN EN 60730-1 :2012-10
DIN EN 676:2017-02 if applicable
DIN EN 267:2017-02 if applicable
DIN EN 12952-8 u. -11 if applicable
DIN EN 12953-7 u. -9 if applicable
DIN EN 50156-1 u. -2 if applicable
EN 746-2
Test mark: CE-0085 AS 0254
To Next Page
Loading...
Need help?
General
