To Next PageTo Next PageWhy is the blade carrier loose on my Land Pride RC5615?
A loose blade carrier on your Land Pride Cutter can be caused by a couple of things. First, the blade carrier hardware might not be tight, so tighten the shaft nut to the specified torque. Second, if it's been running loose in the past, you may need to replace the gearbox bearings and/or shaft.
What causes a bent driveline shaft on a Land Pride RC5615 Cutter?
A bent driveline shaft on your Land Pride Cutter can occur if it's contacting the frame, drawbar, or 3-point arms. To resolve this, reduce lift height in the transport position, reposition the drawbar, or raise/remove the 3-point arms. Bottoming out can also cause this, so shorten the driveline shaft. Insufficient lubrication leading to binding can also be a culprit.
Why is the driveline shaft telescoping tube wearing on my Land Pride RC5615 Cutter?
If the driveline shaft telescoping tube on your Land Pride Cutter is wearing, it's likely due to a lack of lubrication. Make sure to lubricate it every 8 hours of operation.
What causes the driveline shaft telescoping tube to fail on a Land Pride RC5615?
If the driveline shaft telescoping tube on your Land Pride Cutter is failing, it's likely due to shock load. Avoid hitting solid objects.
General| Brand | Land Pride |
|---|---|
| Model | RC5615 |
| Category | Cutter |
| Language | English |
