To Next PageTo Next Page
Need help?Do you have a question about the Land Pride RCR1248 and is the answer not in the manual?
General| Cutting Width | 48 inches |
|---|---|
| Gearbox HP Rating | 40 HP |
| Hitch Type | Category 1 |
| PTO Speed | 540 RPM |
| Type | Rotary Cutter |
| Minimum Tractor HP | 20 HP |
| Number of Blades | 2 |
| Cutting Height Range | 1.5 - 5 inches |
| Deck Construction | 10-gauge steel |
General safe operation practices, operator responsibilities, and awareness of potential hazards.
Explains the meaning and importance of safety alert symbols for hazard warnings.
Guidelines to prevent accidents involving children near equipment.
Recommendations for safe transport of implements, including speed and load balance.
Safety precautions when working with hydraulic systems and high-pressure fluids.
Recommendations for using seat belts and Roll-Over Protective Structures (ROPS).
Prohibits carrying riders on tractors or implements to prevent accidents.
Specifies the minimum tractor horsepower, hitch type, and weight for safe operation.
Procedure for connecting the rotary cutter to a tractor's 3-point hitch.
Instructions for connecting the driveline to the tractor and implement PTO shafts.
Procedure to ensure driveline length prevents damage during operation.
Verifies driveline angles do not exceed limits during operation.
Pre-operation inspection checklist for safety and readiness.
Detailed pre-operation inspection of tractor and cutter components.
Critical safety warnings and guidelines pertaining to cutter operation.
Procedures and tips for effective and safe field cutting operations.
Procedures for inspecting, sharpening, or replacing cutter blades.
Identifies common problems, their causes, and recommended solutions.
