To Next PageTo Next Page
Need help?Do you have a question about the Land Pride RCR1260 and is the answer not in the manual?
General| Cutting Width | 60 inches |
|---|---|
| Gearbox Horsepower Rating | 40 HP |
| Hitch | Category 1 |
| PTO Speed | 540 RPM |
| Overall Width | 63 inches |
| HP Range | 20-40 hp |
| Required Tractor HP | 20 hp |
| Blade Type | Free Swinging |
| Deck Construction | 10-gauge steel |
General safety advice for operating machinery and implements.
Explains the meaning and importance of safety alert symbols.
Defines signal words like DANGER, WARNING, and CAUTION.
Warnings and precautions regarding children around machinery.
Procedures for safely shutting down and storing the tractor.
Guidelines for safely transporting equipment.
General guidelines for performing maintenance safely.
Importance and types of personal protective equipment.
Warnings about high-pressure fluid hazards and precautions.
Recommends using seat belts and ROPS for operator protection.
Warnings against carrying riders on equipment.
Specifies the tractor requirements for operating the cutter.
Importance of using correct torque for bolts during assembly.
Instructions for assembling the hitch and tailwheel.
Step-by-step guide for connecting the cutter to the tractor.
Procedure to check driveline length to prevent damage.
Instructions on how to shorten the driveline if too long.
Primary adjustments for cutter performance.
Procedure to ensure the deck is level side-to-side.
How to adjust the cutting height of the implement.
Adjusting the tailwheel for deck slope.
Pre-operation checks before using the cutter.
Detailed inspection points for tractor and cutter.
