To Next PageTo Next Page
Need help?Do you have a question about the Land Pride RCR1272 and is the answer not in the manual?
General| Model | RCR1272 |
|---|---|
| Type | Rotary Cutter |
| Cutting Width | 72 inches |
| Number of Blades | 2 |
| Overall Width | 75 inches |
| Hitch | Cat. 1 |
| Deck Thickness | 10 gauge |
General safety practices and operator responsibilities for safe operation.
Explains the meaning and importance of safety alert symbols and signal words.
Specific warnings and precautions regarding children near equipment.
Procedures for safely shutting down and storing the tractor and implement.
Safe practices for transporting the implement, including speed and inclines.
General safety rules for performing maintenance on the equipment.
Warnings and procedures for handling high-pressure hydraulic fluids.
Recommends using seat belts and Roll-Over Protective Structures for safety.
Warnings against carrying riders on tractors or implements.
Procedure to ensure the driveline is not too long and can collapse.
Verifies driveline angles and clearance during operation.
Overview of primary adjustments for deck leveling and cutting height.
Steps to adjust the cutter's cutting height and front-to-rear slope.
Critical safety warnings for operation, including PTO, driveline, and general hazards.
Standard procedures for safely shutting down the tractor and implement.
Guidelines for operating the cutter in the field, including speed and material density.
Comprehensive guide for safe operation, including startup checks and field cutting.
Safety and procedures for inspecting, sharpening, and replacing cutter blades.
Details on lubrication points, intervals, and types of lubricants required.
Table listing detailed specifications and capacities for the RCR12 Series cutters.
A table outlining common problems, their causes, and solutions.
Provides torque specifications for various bolt sizes and grades.
