To Next PageTo Next PageHow to solve excessive side skid wear on Land Pride Cutter?
Excessive side skid wear on your Land Pride Cutter may be due to a cutting height that is not level, abrasive soil, or cutting too low. Adjust the cutter height to address these issues.
How to prevent Land Pride RCR2660 Cutter blade carrier bent?
To prevent the blade carrier on your Land Pride Cutter from bending, avoid hitting solid objects and replace the blade carrier if it's already bent. The cause is likely hitting solid objects.
What to do if Land Pride RCR2660 blades coming loose?
If the blades on your Land Pride Cutter are coming loose, it could be because the blades are not tightened properly or the deck attitude is improper. Tighten the blade hardware and lower the front of the deck.
General| Model | RCR2660 |
|---|---|
| Category | Rotary Cutter |
| Number of Blades | 2 |
| Cutting Width | 60 in |
| Gearbox | 540 RPM |
| Cutting Height | 1-6 in |
