To Next Page
M
morenobrandiAug 25, 2025
What causes low water temperature in Landa Pressure Washer?
- AAlex JohnsonAug 25, 2025
If your Landa Pressure Washer has low water temperature, the issue could be due to several reasons. The gas lines might be improperly sized, so refer to the sizing gas lines. The gas pressure could be low, so increase the gas pressure to the machine. An improper pressure regulator might be the cause, so specify BTU and building gas pressure (11 w.c.i.) to the machine for correct regulator sizing. Low gas pressure can also cause this, so increase the gas pressure. Soot buildup on the coils can prevent heat transfer, so clean the coils. Finally, the burner nozzle might be improper, so refer to the serial plate.
General
