What to do if my Landa XPERT-HD 3.8/35 P Pressure Washer spray wand leaks?
If your Landa Pressure Washer spray wand leaks, ensure it's properly attached by sliding it into the gun and turning the wand collar clockwise onto the spray gun threads until tight.
Why does my Landa XPERT-HD 3.8/35 P engine falter?
If your Landa Pressure Washer engine falters, it might be because the choke is opened too soon. Move the choke to the halfway position until the engine runs smoothly.
What does it mean if water or oil is leaking from the bottom of my Landa XPERT-HD 3.8/35 P pump?
A small amount of leaking from the bottom of the Landa Pressure Washer pump is normal. If excessive leaking occurs, call your local distributor.
How to fix low operating pressure on my Landa Pressure Washer?
If your Landa Pressure Washer has low operating pressure, it could be due to several reasons. First, check your water supply. Ensure the faucet is fully open, the inlet hose isn't kinked, and it's adequately sized. Clean the inlet water screen. If the issue persists, the unloader valve might be faulty or mis-adjusted, requiring adjustment or a repair kit. If the pressure washer was exposed to freezing temperatures, thaw it out completely, including the hose, spray gun, and wand.
General| Brand | Landa |
|---|---|
| Model | XPERT-HD 3.8/35 P |
| Category | Pressure Washer |
| Language | English |
To Next Page
