2/30 Revision history
© Landis+Gyr D000011142 en k – E65C CU-B1, B2, B4 – User Manual
Revision history
Version Date Comments
– 12.03.2001 First edition
a 19.09.2001 Modifications to face plate, RS232, RS485 interface, applications
b 27.02.2002
Technical Data 1.2 Pulse length 30 ms
c 22.03.2002 Pin allocation of RS 485 corrected
d 16.09.2002 Version CU-B3 cancelled
e 31.01.2003 New layout L+G
f 06.07.2005 Old phone no. replaced by new one
g 16.04.2009 New RS485 installation note
h 07.11.2011 Layout adaptation
k 18.04.2016 Updated disclaimer.
Additional warning information based on standards.
Updated company name.
lthough the information contained within this document are presented in good faith and believed to be correct, Landis+Gyr (including its
affiliates, agents and employees) disclaim any and all liability for any errors, inaccuracies or incompleteness relating to the product.
Landis+Gyr makes no warranty, representation or guarantee regarding the performance, quality, durability or suitability of the products for
any particular purpose. To the fullest extent permitted by law Landis+Gyr disclaims (1) any and all liability arising out of the use of the
product, (2) any and all liability, including, but without limitation to, special, consequential and indirect damages and losses, and (3) any and
all implied warranties, including, but without limitation to, fitness for purpose and merchantability.
The information contained in this document is strictly confidential and is intended for the addressee only. The unauthorised use, disclosure,
copying, alteration or distribution of this document or the contents thereof is strictly prohibited and may be unlawful.
ll product information are subject to change without notice.
To Next Page
Loading...
