14
Landmann
Assembly procedure
1. Assemble the cylinder chamber supports (2) to the base (1)
using M6x15 (d) bolts and M6 (e) nuts.
2. Screw the connecting element (3) to the cylinder chamber
supports (2) using M6x15 (a) bolts and M6 (e) nuts.
3. Slide the rubber attachment (4) over the underside of the
lower column (long) (5) in such a way that the holes in the
rubber attachment (4) align with the holes in the lower co-
lumn (5).
Now insert the lower column (long) (5) with the rubber at-
tachment (4) onto the connecting element (3) and secure it
in place using three M5x15 (f) cylinder head screws.
2
2
1
3
3
4
5
To Next Page
Loading...