Laney LA30C - LA65 C Front Panel Overview; Auxiliary Channel 2 Controls; Instrument Channel 1 Controls; Anti-Feedback, Chorus, and Reverb Features

Laney
4
LA65C front panel
Aux
Input
Mic Gain Gain
Input
Instrument Channel
Auxillary Channel
Bass Bass
Phase
Paramid
Rate Depth Level
CD In
VolumeTreble Treble Freq Level
Anti-Feedback Chorus Reverb
Acoustic Amplifier
Power
00
11
77
11
99
33
1010
44 66
00
55
88
22
77
11
99
33
1010
44 66
00
55
88
22
77
11 99
33
1010
44 66
00
55
88
22
77
11 99
33
1010
44 66
00
55
88
22
77
11 99
33
1010
44 66
00
55
88
22
77
11 99
33
1010
44 66
00
55
88
22
77
11 99
33
1010
44 66
00
55
88
22
77
11 99
33
1010
44 66
00
55
88
22
77
11 99
33
1010
44 66
00
55
88
22
77
11 99
33
1010
44 66
00
55
88
22
77
11 99
33
1010
44 66
00
55
88
22
77
11 99
33
1010
44 66
00
55
88
22
LA65C
22
44 44
22
55
11 11
55
- 0+- 0+
33
33
22
44 44
22
55
11 11
55
- 0+- 0+
33
33
1K1K
100100
500500
22
44
44
22
55
11 11
55
- 0+- 0+
33
33
22
44
44
22
55
11 11
55
- 0+- 0+
33
33
22
44
44
22
55
11 11
55
- 0+- 0+
33
33
2 2
1 1
1
2
11
22 33 44
11
55
66 77 88 99
1010
1111 1212
1313
1414 1515 1717 1818 1919 2020
1616
18. Tape/CD input:
19. Volume:
4. Bass:
11/12. Paramid-
Freq/Level:
5. Treble:
17. Reverb Level:
Phase switch assists in the cancellation of low frequency oscillations which are associated with
acoustic guitar feedback.
Paramid controls: Used in conjunction with each other to to eliminate feedback, by determining
the boosted or cut frequency and the boosted or cut level of frequency.
1. Mic Input:
Assigns reverb to either channel 1, channel 2 or both.
Controls the level of reverb on the channel.
Jack input for Instrument Channel, connect guitars and other musical instruments via this
socket.
Controls the signal level for instruments connected to Instrument Channel 1.
Active Bass control allowing boost and cut of the low-frequency response of the instruments
connected to Instrument Channel 1.
Active Treble control allowing boost or cut of the high frequency response of the instruments
The input socket has been designed to accept both balanced and unbalanced signals from
microphones with an XLR input connector. Good quality low impedance condensor or dynamic
mics should preferably be used for best results, these will ensure the best possible results from
hand-held instruments or closely mic'd instruments.
Auxilluary jack input for jack equipped mics and sound sources such as keyboards drum
machines etc.
Controls the signal level for instruments connected to Auxilluary Channel 2.
Active Bass control allowing boost and cut of the low-frequency response of the instruments
connected to Auxilluary Channel 2.
Active Treble control allowing boost or cut of the high frequency response of the instruments
connected to Auxilluary Channel 2.
Auxillary Channel 2:
14/15. Chorus-
Rate/Depth:
10. Phase Switch:
2. Aux Input:
3. Gain:
6. Input:
13. Chorus Assign:
16. Reverb Assign:
Instrument Channel 1:
8. Bass:
9. Treble:
7. Gain:
Anti-Feedback:
Assigns Chorus to either channel 1, channel 2 or both.
Chorus controls: Used in conjunction with each other to determine the rate and depth of the
selected chorus sweep.
Chorus:
Phono (RCA) sockets are provided for the connection of tape/CD machines.
Controls the overall listening level of the amplifier.
(Always switch off and
disconnect the power cord when not in use).
Main power switch, the led will be lit when the amplifier is switched on.
Reverb:
20. Power Switch:
ACOUSTIC