32
TYPICAL OPERATION CONT’D
GCCO-PT TYPICAL OPERATION SEQUENCE
ACTION RESULT
Press the on switch. Control panel comes on, display says “LANG, Run
Oven, Time Date Program.
Select “Run Oven”. Display will show a list of product to choose.
Select Product button next to Icon desired. Display says “Preheating to XXXF”.
Beeper sounds briefly. Display says “Ready”.
Select Product to start. Display shows possible product selection for that
temperature.
Select Product to start. Display says “Select shelf”.
Press Product button next to desired shelf. Display will show icon chosen and begin to count
down.
Beeper sounds continuously. Display shows “ DONE” press button and remove
product from that shelf.
Oven is ready for another product.
To Next Page
Loading...
