Lansinoh Smartpump - Quick Start Guide and Basic Operation; Assembly and Getting Started; 2-Phase Pumping Technology; Customization for Comfort

4 5
QUICK START GUIDE
Before rst use, sterilize all parts that will come into contact with milk according to
instruction on pg 9, section 3.1.
Hold Breastmilk Expression Set to your breasts so
that the nipple is aligned to extend straight toward the
nipple tunnel of the breast ange, ensuring there are
no gaps for air to enter. Make sure set is tilted slightly
downward to allow milk to ow into bottles.
2-Phase Technology –
Using Let-Down and Expression Phases
Press the power button to start the pump in let-down phase .
Let-down phase will run automatically for two minutes.
To begin expression phase sooner, press the Let-down/Expression Toggle
button to move to the expression phase. Press the Let-down/Expression
Toggle button again at any point to switch back to Let-down phase.
Let-down/Expression
Toggle Button
Style Mode
Toggle Button
Suction Level
Customization for Comfort and Eciency
Increase or decrease the suction to the
maximum level that you nd comfortable.
Increase suction by pressing the button.
Decrease suction by pressing the
button.
Lansinoh is here to support you. If you have questions,
please do not hesitate to contact us at (800) 292-4794
Do NOT wash or sterilize tubing
Every baby feeds dierently. The Smart-
pump
™
oers three dierent pumping styles
to choose from, allowing you to choose the
option that is most like your baby’s feeding
patterns. Change the pumping style using
the Style Mode Toggle button to nd
the pumping style that works best for you.
NOTE: When you switch to the expression mode the
pump will start in Style 2.
Style 1 Style 2 Style 3
Insert purple diaphragm
with arrows pointing foward
Attach clear cover and twist
so tubing connector faces back
Attach ange
Insert valve Attach bottle Attach tubing
Secure Y connector Secure connector Attach to pump base
Pumping Style Selection
Adjusting Suction Levels
Assembly
Please carefully read all instructions prior to use
Connect pump to power using AC Adapter or six AA Alkaline Batteries (not included)
Getting Started
See detailed instruction on pgs 10-11. Proper assembly is essential to ensure proper function and suction.