Lantronix EDS-MD Series

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 124
url <text>
Sets HTTP request URL following IP address or
hostname.
username <text>
Sets the Username used to logon to HTTP server.
write
Stores the current configuration in permanent
memory.
connection 1 (config-action-ftp_put-connection:eth0 link state change:1) level commands
clrscrn
Clears the screen.
default filename
Sets default FTP remote Filename.
default port
Sets default Port number.
default protocol
Sets default FTP Protocol.
default username
Sets default Username.
exit
Exits to the next higher level.
filename <text>
Sets FTP remote Filename.
host <text>
Sets FTP server IP address or hostname to be
connected to.
no host
Clears FTP server IP address or hostname.
no password
Sets default Password.
password <text>
Sets the Password used to logon to FTP server.
port <number>
Sets the Port number which FTP server is listening
to.
protocol ftp
Selects FTP Protocol.
protocol ftps
Selects FTPS Protocol.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
username <text>
Sets the Username used to logon to FTP server.
write
Stores the current configuration in permanent
memory.
connection 2 (config-mach10-connection:2) level commands
clrscrn
Clears the screen.
default host
Restores the Hostname or IP address of Mach 10.
default mqtt host
Restores the Hostname or IP address of MQTT
server.
default mqtt port
Restores the Port of MQTT server.
default port
Restores the Port of Mach 10.
default proxy port
Restores the Port of proxy server.
default proxy type
Restores the default Proxy server type (SOCKS5).
exit
Exits to the next higher level.
host <text>
Sets the Hostname or IP address of Mach 10.
mqtt host <text>
Sets the Hostname or IP address of MQTT server.
mqtt port <number>
Sets the Port of MQTT server.
mqtt security disable
Disables SSL for MQTT.
mqtt security enable
Enables SSL for MQTT.
mqtt state disable
Disables MQTT.
mqtt state enable
Enables MQTT.
no proxy host
Restores the Hostname or IP address of the proxy
server.
no proxy password
Restores the password for proxy server.