Lantronix EDS-MD Series

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 126
default username
Sets default Username.
exit
Exits to the next higher level.
filename <text>
Sets FTP remote Filename.
host <text>
Sets FTP server IP address or hostname to be
connected to.
no host
Clears FTP server IP address or hostname.
no password
Sets default Password.
password <text>
Sets the Password used to logon to FTP server.
port <number>
Sets the Port number which FTP server is listening
to.
protocol ftp
Selects FTP Protocol.
protocol ftps
Selects FTPS Protocol.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
username <text>
Sets the Username used to logon to FTP server.
write
Stores the current configuration in permanent
memory.
connection 2 (config-action-http_post-connection:eth1 link state change:2) level commands
clrscrn
Clears the screen.
default port
Sets default Port number.
default protocol
Sets default HTTP Protocol.
exit
Exits to the next higher level.
host <text>
Sets HTTP server IP address or hostname to be
connected to.
no host
Clears HTTP server IP address or hostname.
no password
Clears the Password.
no url
Clears HTTP request URL.
no username
Clears the Username.
password <text>
Sets the Password used to logon to HTTP server.
port <number>
Sets the Port number which HTTP server is listening
to.
protocol http
Selects HTTP Protocol.
protocol https
Selects HTTPS Protocol.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
url <text>
Sets HTTP request URL following IP address or
hostname.
username <text>
Sets the Username used to logon to HTTP server.
write
Stores the current configuration in permanent
memory.
connection 2 (config-action-ftp_put-connection:eth1 link state change:2) level commands
clrscrn
Clears the screen.
default filename
Sets default FTP remote Filename.
default port
Sets default Port number.
default protocol
Sets default FTP Protocol.
default username
Sets default Username.