Lantronix EDS-MD Series - Page 145

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 145
no cc
Removes the Cc addresses for email alerts.
no clear mail counters
Restores the email counters to the aggregate
values.
no message file
Removes the file name, so the message body will
be empty.
no reply to
Removes the Reply To address for email alerts.
no subject
Removes subject used for email alerts.
no to
Removes the To addresses for email alerts.
priority high
Sets X-Priority for email alerts to 2 (high).
priority low
Sets X-Priority for email alerts to 4 (low).
priority normal
Sets X-Priority for email alerts to 3 (normal).
priority urgent
Sets X-Priority for email alerts to 1 (urgent).
priority very low
Sets X-Priority for email alerts to 5 (very low).
reply to <text>
Sets the Reply To address for email alerts. <text> =
email address to place in the Reply To field of the
email alert.
send
Sends an email using the current settings.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
show log
Displays the email log.
show statistics
Displays email statistics.
subject <text>
Sets the Subject for email alerts. <text> = text to
placed as the subject.
to <text>
Sets To addresses for email alerts. <text> = a
quoted, semicolon separated list of email
addresses.
write
Stores the current configuration in permanent
memory.
email 13 (email:13) level commands
auto show statistics
Continuously displays email statistics.
cc <text>
Sets Cc addresses for email alerts. <text> = a
quoted, semicolon separated list of email
addresses.
clear log
Clears all entries from the mail log.
clear mail counters
Sets the email counters to zero.
clrscrn
Clears the screen.
default priority
Sets X-Priority for email alerts to 3 (normal).
email <number>
Enters the configure email level.
exit
Exits to the enable level.
message file <text>
Specifies a text file, the contents of which will be the
message body of an email alert. <text> = the name
of a local file.
no cc
Removes the Cc addresses for email alerts.
no clear mail counters
Restores the email counters to the aggregate
values.
no message file
Removes the file name, so the message body will
be empty.
no reply to
Removes the Reply To address for email alerts.