Lantronix EDS-MD Series - Wall Mounting Instructions; Mounting to Walls Requiring Anchors; Mounting to Walls Not Requiring Anchors

4: Configuration Using XML
EDS-MD® Wired IoT Device Gateway Command Reference 28
connection: instance
("Instance" attribute is
a number.)
host Default:
api.mach10.com
port Default: 443
secure port enable, disable
validate certificates enable, disable
mqtt state enable, disable
mqtt host Default:
mqtt.mach10.com
mqtt port Default: 443
mqtt security enable, disable Default: enable
use proxy enable, disable Default: disable
proxy type SOCKS5
proxy host
proxy port Default: 80
proxy username
proxy password
mach10 line:
instance ("Instance"
attribute is a
number.)
state enable, disable Default: disable
project tag
command delimiter Default: +++
status update interval N minutes Default: 1 minutes
content check interval N hours Default: 24 hours
network failover:
instance (“instance
attribute is eth0,
eth1, eth2.)
state enable, disable Default: disable
hostname
method ICMP, TCP
timeout
interval
failover threshold N pings
failback threshold N pings
failover interface
rss feed enable, disable Default: disable
persist enable, disable Default: disable
max entries Default: 100
Group Name
(continued)
Group Item Value Name Value Options Additional
Information