Lantronix EDS-MD Series - Page 39

4: Configuration Using XML
EDS-MD® Wired IoT Device Gateway Command Reference 39
line (group nested within
line above)
state enable or disable
protocol Tunnel or None.
baud rate <decimal> bits per second
parity None, Odd, or Even
data bits 7 or 8
stop bits 1 or 2
flow control None, Hardware, or
Software
xon char of form
&amp;#60;control&amp;#62
;Q
xoff char of form
&amp;#60;control&amp;#62
;S
mach10 serial number string
device id string
status Running, Inactive
memory main heap total memory decimal number of bytes
processes process ("Instance"
attribute is "<decimal>")
stack used decimal number
stack size decimal number
cpu % decimal number
thread name String
query port last connection ip address ip address in format
nnn.nnn.nnn.nnn
port decimal number
in discoveries decimal number
unknown queries decimal number
erroneous packets decimal number
out discovery replies decimal number
errors decimal number
status enabled, disabled
rss url string in the form of a web
url
data entries decimal number
bytes decimal number
sessions telnet or ssh ("Instance"
attribute is "<number>")
local port
remote ip address
remote port
duration
Group Name (continued) Item Name Value Name Valid Values