Lantronix EDS-MD Series - Page 729

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 729
send break <control>
Sets the optional send break character. <text> = the
character. The character may be input as text,
control, decimal, or hex. A control character has the
form <control>C. A decimal value character has the
form \99. A hex value character has the form 0xFF.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
terminal <line>
Enters the configure-terminal level. <line> = number
of the terminal line (serial port) to be configured.
terminal network
Enters the configure-terminal level for the network.
terminal type <text>
Sets the terminal type.
tunnel <line>
Enters the tunnel level. <line> = number of the
tunnel line (serial port) to be configured.
write
Stores the current configuration in permanent
memory.
trusted authorities (ssl-auth) level commands
add
Adds an Authority Certificate.
clrscrn
Clears the screen.
delete all
Removes All Authority Certificates.
exit
Exits to the ssl level.
no intermediate authority <cert>
Removes an Intermediate Authority Certificate.
<cert> = index displayed by "show authority"
command.
no trusted authority <cert>
Removes a Trusted Authority Certificate. <cert> =
index displayed by "show authority" command.
show
Displays Authority Certificate Information.
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
tunnel 1 (tunnel:1) level commands
accept
Enters the accept level for this tunnel.
auto show statistics
show connection statistics
clear counters
Zeros all tunnel counters
clrscrn
Clears the screen.
connect
Enters the connect level for this tunnel.
disconnect
Enters the disconnect level for this tunnel.
exit
Exits to the enable level.
line <line>
Enters the line level. <line> = number of the line
(serial port) to be configured.
modem
Enters the modem level for this tunnel.
no clear counters
Unzeros all tunnel counters
packing
Enters the packing level for this tunnel.
serial
Enters the serial level for this tunnel.
show history
Displays the last 20 commands entered during the
current CLI session.
show statistics
show connection statistics