Lantronix EDS-MD Series

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 737
terminal <line>
Enters the configure-terminal level. <line> = number
of the terminal line (serial port) to be configured.
terminal network
Enters the configure-terminal level for the network.
tunnel <line>
Enters the tunnel level. <line> = number of the
tunnel line (serial port) to be configured.
write
Stores the current configuration in permanent
memory.
tunnel 16 (tunnel:16) level commands
accept
Enters the accept level for this tunnel.
auto show statistics
show connection statistics
clear counters
Zeros all tunnel counters
clrscrn
Clears the screen.
connect
Enters the connect level for this tunnel.
disconnect
Enters the disconnect level for this tunnel.
exit
Exits to the enable level.
line <line>
Enters the line level. <line> = number of the line
(serial port) to be configured.
modem
Enters the modem level for this tunnel.
no clear counters
Unzeros all tunnel counters
packing
Enters the packing level for this tunnel.
serial
Enters the serial level for this tunnel.
show history
Displays the last 20 commands entered during the
current CLI session.
show statistics
show connection statistics
terminal <line>
Enters the configure-terminal level. <line> = number
of the terminal line (serial port) to be configured.
terminal network
Enters the configure-terminal level for the network.
tunnel <line>
Enters the tunnel level. <line> = number of the
tunnel line (serial port) to be configured.
write
Stores the current configuration in permanent
memory.
xml (xml) level commands
clrscrn
Clears the screen.
exit
Exits to the enable level.
secret xcr dump
Dump XML configuration containing secrets to the
console
secret xcr dump <group list>
Dump specified XML configuration containing
secrets to the console
secret xcr export <file>
Save XML configuration containing secrets to a file
secret xcr export <file> <group list>
Save specified XML configuration containing secrets
to a local file
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
xcr dump
Dump XML configuration to the console
xcr dump <group list>
Dump specified XML configuration to the console
xcr export <file>
Save XML configuration to a file
xcr export <file> <group list>
Save specified XML configuration to a local file