Lantronix EDS-MD Series

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 94
write
Stores the current configuration in permanent
memory.
clock (config-clock) level commands
clock set <time(hh:mm:ss)> <day (1-31)> <month
text> <year>
Sets the system clock.
clock timezone
Shows possible time zone names.
clock timezone <time zone>
Sets the timezone to be displayed. Use "clock
timezone" to show choices.
clrscrn
Clears the screen.
default clock timezone
Restores the default timezone, which is UTC.
default synchronization method
Restores the default time synchronization method
(Manual).
exit
Exits to the configuration level.
ntp
Enters the next lower level.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
show system clock
Displays the system clock.
synchronization method manual
Set time manually.
synchronization method sntp
Synchronize time with a NTP server.
write
Stores the current configuration in permanent
memory.
configure (config) level commands
action
Enters the config action level.
arp
Changes to the command level for ARP
configuration and status.
cli
Change to menu level for CLI configuration and
status
clock
Change to menu level for Clock configuration and
status
clrscrn
Clears the screen.
diagnostics
Enters the diagnostics level.
discovery
Enters the discovery level.
exit
Exits to the enable level.
ftp
Enters the ftp level.
gateway
Enters the gateway level.
host <number>
Change to config host level
http
Enters the http level.
icmp
Changes to the command level for ICMP
configuration and status.
if <instance>
Changes to the interface configuration level.
ip
Changes to the command level for IP configuration
and status.
kill ssh <session>
Kills SSH session with index from "show sessions"
kill telnet <session>
Kills Telnet session with index from "show sessions"
mach10
Enters the mach10 level.
rss
Change to menu level for RSS configuration and
status