Lantronix EDS1100 - Page 149

5: Commands and Levels
EDS1100/2100 Command Reference 149
tftp (config-tftp) level commands
allow file creation disable
Prohibits the TFTP server from creating files on the file system.
allow file creation enable
Enables the TFTP server to create files on the file system.
allow firmware update disable
The TFTP server rejects any attempt to update firmware.
allow firmware update enable
The TFTP server accepts a firmware image for update based on
the file name.
allow xcr import disable
The TFTP server rejects any attempt to import XML configuration.
allow xcr import enable
The TFTP server accepts an XCR file for configuration update
based on the file name.
clear counters
Sets the TFTP counters to zero.
clrscrn
Clears the screen.
exit
Returns to the config level.
no clear counters
Restores the TFTP counters to the aggregate values.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
show statistics
Displays the TFTP statistics.
state disable
Disables the TFTP server.
state enable
Enables the TFTP server.
write
Stores the current configuration in permanent memory.
traps (config-snmp-traps) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no primary destination
Deletes the primary SNMP trap host.
no secondary destination
Deletes the secondary SNMP trap host.
primary destination <text>
Sets the primary SNMP trap host.
<text> = IP address of host running the SNMP trap.
secondary destination <text>
Sets the secondary SNMP trap host.
<text> = IP address of host running the SNMP trap.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
state disable
Disables the sending of SNMP trap messages.
state enable
Enables the sending of SNMP trap messages.
write
Stores the current configuration in permanent memory.
tunnel 1 (tunnel:1) level commands
accept
Enters the accept level for this tunnel.
auto show statistics
show connection statistics
clear counters
Zeros all tunnel counters
clrscrn
Clears the screen.
connect
Enters the connect level for this tunnel.
disconnect
Enters the disconnect level for this tunnel.
exit
Exits to the enable level.
line <line>
Enters the line level.