Lantronix EDS1100 Command Reference

4: Configuration Using XML
EDS1100/2100 Command Reference 20
The “xml paste passwords” <configgroup> name is used with the “passwords” <configitem> name
and “cli login” and “cli enable level” values to specify the passwords to use when the device has
been configured with password protection. The password value is clear text. To protect the
password, establish an SSH connection to the device server. Figure 4-7 shows an example.
Figure 4-7 XML Example of Supplying Passwords
XML Configuration Groups
Table 4-8 lists the EDS1100/2100 XCR groups in alphabetical order. This table indicates the
various group items, as well as some possible value names and options.
Note: Any instance of &#60 in the table may be read as “less than” and any instance of
&#62 may be read as “greater than”.
Table 4-8 XCR Groups
Group
Name
Group Item Value Name Value Options Addition
Information
arp arp delete ip address Remove an entry
from the ARP
table. Specify the
entry by its IP
address.
arp entry ip address
mac address
timeout Default: 60
seconds
<!—To supply passwords when importing via cli capture -->
<configgroup name = "xml paste passwords">
<configitem name = "passwords">
<value name = "cli login"></value>
<value name = "cli enable level"></value>
</configitem>
</configgroup>

Lantronix EDS1100 Specifications

General

Brand	Lantronix
Model	EDS1100
Category	Server
Language	English