Lantronix EDS1100

5: Commands and Levels
EDS1100/2100 Command Reference 50
5: Commands and Levels
Click the level in the tree structure and it will take you to the command list for that level.
root
o enable (enable)
 configure (config)
 arp (config-arp)
 cli (config-cli)
 ssh (config-cli-ssh)
 telnet (config-cli-telnet)
 diagnostics (config-diagnostics)
 log (config-diagnostics-log)
 ftp (config-ftp)
 host 1 (config-host:1)
 host 2 (config-host:2)
 host 3 (config-host:3)
 host 4 (config-host:4)
 host 5 (config-host:5)
 host 6 (config-host:6)
 host 7 (config-host:7)
 host 8 (config-host:8)
 host 9 (config-host:9)
 host 10 (config-host:10)
 host 11 (config-host:11)
 host 12 (config-host:12)
 host 13 (config-host:13)
 host 14 (config-host:14)
 host 15 (config-host:15)
 host 16 (config-host:16)
 http (config-http)
 icmp (config-icmp)
 if 1 (config-if:eth0)
 link (config-ethernet:eth0)
 ip (config-ip)
 ip filter (config-filter)
 lpd 1 (config-lpd:1)
 lpd 2 (config-lpd:2)
 modbus (modbus)
 rss (modbus-rss)
 query port (config-query_port)
 rss (config-rss)
 smtp (config-smtp)
 snmp (config-snmp)
 traps (config-snmp-traps)
 syslog (config-syslog)
 tcp (config-tcp)
 terminal 1 (config-terminal:1)
 terminal 2 (config-terminal:2)
 terminal network (config-terminal:network)
 tftp (config-tftp)
 udp (config-udp)
 vip (config-vip)
 device (device)