Lantronix EDS1100 - Page 151

5: Commands and Levels
EDS1100/2100 Command Reference 151
clear counters
Zeros counters
clrscrn
Clears the screen.
exit
Exits to the configuration level.
no clear counters
Unzeros IP counters
show history
Displays the last 20 commands entered during the current CLI
session.
show statistics
Shows UDP statistics
write
Stores the current configuration in permanent memory.
vip (config-vip) level commands
auto show counters
Displays VIP counters continuously.
auto show status
Displays VIP status continuously.
clear counters
Sets the VIP counters to zero.
clrscrn
Clears the screen.
exit
Exits to the configuration level.
no clear counters
Restores the VIP counters to the aggregate values.
show
Displays the current configuration.
show counters
Displays the VIP counters.
show history
Displays the last 20 commands entered during the current CLI
session.
show status
Displays the VIP status.
state disable
Disables use of Virtual IP (VIP) addresses.
state enable
Enables use of Virtual IP (VIP) addresses.
write
Stores the current configuration in permanent memory.
xml (xml) level commands
auto show statistics
Show XML statistics
clear counters
Zeros XML statistics
clrscrn
Clears the screen.
exit
Exits to the enable level.
no clear counters
Unzeros XML statistics
secret xcr dump
Dump XML configuration containing secrets to the console
secret xcr dump <group list>
Dump specified XML configuration containing secrets to the
console
secret xcr export <file>
Save XML configuration containing secrets to a file
secret xcr export <file> <group list>
Save specified XML configuration containing secrets to a local file
show history
Displays the last 20 commands entered during the current CLI
session.
show statistics
Show XML statistics
write
Stores the current configuration in permanent memory.
xcr dump
Dump XML configuration to the console
xcr dump <group list>
Dump specified XML configuration to the console
xcr export <file>
Save XML configuration to a file
xcr export <file> <group list>
Save specified XML configuration to a local file
xcr import <file>
Load XML configuration from a local file
xcr import <file> <group list>
Load specified XML configuration from a local file