Lantronix EDS4100 - Page 18

3: Summary of CLI Commands
EDS Device Servers Command Reference 18
Configure Menu
Command
Description
ip ftp username
<string>
Sets the administrative username for the FTP server.
<string> = administrative username.
ip http auth <uri>
<realm>
Creates a new HTTP server authentication directive.
<uri> = URI of the server.
<realm> = domain of the server.
ip http auth type <uri>
basic
Sets an HTTP server authentication directive to the Basic
Access Authentication scheme.
<uri> = URI of the server.
ip http auth type <uri>
digest
Sets an HTTP server authentication directive to the
Digest Access Authentication scheme.
<uri> = URI of the server.
ip http auth type <uri>
none
Sets the authentication type for an HTTP server
authentication directive to none.
<uri> = URI of the server.
ip http auth type <uri>
ssl
Sets the authentication type for an HTTP server
authentication directive to SSL.
<uri> = URI of the server.
ip http auth type <uri>
ssl-basic
Sets the authentication type for an HTTP server
authentication directive to SSL-Basic.
<uri> = URI of the server.
ip http auth type <uri>
ssl-digest
Sets the authentication type for an HTTP server
authentication directive to SSL-Digest.
<uri> = URI of the server.
ip http auth user <uri>
<user> <password>
Creates or modifies a user for an HTTP server
authentication directive.
<uri> = URI of the server.
<user> = username.
<password> = password associated with the username.
ip http log
Enables HTTP server logging.
ip http log entries
<number>
Sets the maximum number of HTTP server log entries.
<number> = maximum number of HTTP server log
entries.
ip http log format
<string>
Sets the log format for the HTTP server.
<string> = log format.