Lantronix Spider

11: Command Reference
Spider™ and SpiderDuo® KVM-over-IP Device User Guide 116
Parameters
[state <on/off>]
Description
Sets PCU parameters.
show power
Syntax
show power
Description
Displays PCU status and settings.
Serial Port Commands
set serial mode
Syntax
set serial mode passthrough | config [<parameters>]
Parameters
[baud <300-115200>]
[databits <7|8>]
[stopbits <1|2>]
[parity <none|odd|even>]
[flowcontrol <none|xon/xoff|rts/cts>]
Description
Set serial port parameters for each mode.
show serial
Syntax
show serial
Description
Displays serial port settings.
WOL (Wake on LAN) Commands
connect wakeonlan device
Syntax
connect wakeonlan device [Device Name]