Lantronix UDS1100 Programming Guide

LANTRONIX UDS1100: CONNECTION AND DEVICE PROGRAMMING GUIDE (PN 9719-7031B)
PAGE 6 OF 7
9. In the Web Configuration window, click on the “Navigate” button (the green arrow button) in
the upper right hand corner (Figure 15).
10.
10. This will open the User Name and Password window (Figure 16) for the UDS1100 device
to which you have just assigned an IP Address. There is no username or password
required. Click on the “OK” button to continue.
11. On the Lantronix screen that follows (Figure 17), click on Network and make sure “Use
the following IP Configuration” is selected and your IP information is correct. Make sure
“Auto Negotiate” is selected. Click the “OK” button when done.
Figure 15
Figure 16
Figure 17

Lantronix UDS1100 Specifications

General

Isolation	1.5 kV
Certification	UL, CSA, FCC, CE, TUV, CTick, VCC, UL 864 RoHS
Serial interface type	RS-232/422/485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Electrostatic Discharge (ESD) protection	15 kV
Cabling technology	10/100Base-T(X)
USB 2.0 ports quantity	0
Supported network protocols	ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP
Built-in processor	Lantronix DSTNI-EX
Processor frequency	48 MHz
Compatible operating systems	Windows 98/ME/NT/2000/XP
Flash memory	2 MB
RAM capacity	0.256 MB
LED indicators	LAN
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Input voltage	100 - 240 V

Weight and Dimensions

Weight	400 g
Dimensions (WxDxH)	72 x 23 x 95 mm