Need help?Do you have a question about the Lantronix xSenso 2100 and is the answer not in the manual?
Details the diagnostic tools and features available for troubleshooting.
Explains the different ways to configure the xSenso device settings.
Provides instructions and guidelines for securely mounting and connecting the xSenso.
Guides users on how to open and log into the Web Manager interface.
Details configurable settings for the Ethernet interface (IP, BOOTP, DHCP, etc.).
Provides steps for configuring network interface settings via Web Manager or CLI.
Configures the Data Acquisition format for Tunnel and Alarm Connect.
Details settings for configuring analog input channels, including range and alarms.
Explains configuration for analog output channels (xSenso 21A2 only).
Describes configuration for relay outputs (xSenso 21R2 only).
Details settings for configuring data logging, including filename, period, and data inclusion.
Lists available alarms and reports that can trigger actions.
Details how to configure actions for alarms and reports.
Configures connection parameters for alarms and reports.
Configures email alerts for alarms and reports.
Configures uploading data via FTP for alarms or reports.
Configures sending data via HTTP POST for alarms or reports.
Configures relay control based on alarm conditions.
Configures sending SNMP traps for alarms or reports.
Configures how network tunneling operates.
Sets the method for accepting incoming network connections.
Configures the Modbus server and its TCP ports.
Configures Hypertext Transfer Protocol settings for web access.
Configures authentication methods for HTTP access.
Configures Simple Network Management Protocol settings.
Configures Simple Mail Transfer Protocol settings for email.
Configures Secure Shell settings for secure remote access.
Manages SSH host keys for secure server authentication.
Manages known hosts for SSH client security.
Configures Secure Sockets Layer settings for secure communication.
Guides on generating self-signed certificates and keys.
Covers rebooting, factory defaults, and firmware updates.
Configures email alerts for system events.
Steps to upload new firmware using the device's web manager.
Lists detailed specifications for analog input channels.
Lists detailed specifications for analog output channels.
Lists detailed specifications for relay ports.
To Next Page
General