xSenso User Guide 22
3: Installation of xSenso
This chapter describes how to install the xSenso analog device server. It contains the following
sections:
Package Contents
User-Supplied Items
Hardware Components
Installing the xSenso
Package Contents
The xSenso package includes the following items:
One xSenso 2100 device
One 3-contact terminal block plug (screw type for power input port)
Two 6-contact terminal block plug (screw type for analog input ports)
Wall Mount Bracket
Four Rubber Feet
Quick Start Guide
User-Supplied Items
To complete your installation, you need the following items:
Analog devices and sensors that require network connectivity.
An available connection to your Ethernet network and an Ethernet cable.
A working AC power outlet if the unit will be powered from an AC power adapter.
A 9-30VDC power supply either terminal screw or barrel input (both may be used
simultaneously for power redundancy)
To Next Page
Loading...
Need help?
General