17: Maintenance and Diagnostics Settings
xSenso User Guide 96
Using XML
Include in your file: <configgroup name=”arp”>
SMTP Settings
Table 17-7 SMTP Settings
To Configure ARP Network Stack Settings
Using Web Manager
To configure SMTP protocol settings, go to the Admin tab/page, click Protocol Stack in the
menu and select SMTP.
Using the CLI
To enter the command level: enable -> config -> smtp
Using XML
Include in your file: <configgroup name=”smtp”>
Diagnostics
The xSenso has several tools for diagnostics and statistics. Various options allow for the
configuration or viewing of IP socket information, ping, traceroute, memory, and processes.
Hardware
To View Hardware Information
Using Web Manager
To view hardware information, go to the Admin tab/page, click Diagnostics in the menu and
select Hardware.
Using the CLI
To enter the command level: enable -> device, show hardware information
SMTP Settings Description
Relay Address Enter the Relay Address to be used to direct all outbound email messages
through a mail server.
Relay Port Enter the Relay Port number to be used for all outbound email messages
through the mail server.
To Next Page
Loading...
Need help?
General