Lantronix xSenso 2100 - Protocol Support; Figure 2-2 Sample Applications

2: Introduction
xSenso User Guide 17
Figure 2-2 Sample Applications
Note: See Sample Applications on page 16 for an explanation of Figure 2-2.
Protocol Support
The xSenso device server contains a full-featured IP stack. Supported protocols include:
 ARP, HTTP, HTTPS, SMTP AUTH, SNMP v1/v2c/v3, Modbus TCP, UDP/IP, TCP/IP, SSH,
SSL, TLS, RSS, UPnP, ICMP, BOOTP, DHCP, Auto IP, Telnet, SNTP, FTP, FTPS, DNS,
TFTP, XML and Syslog for network communications and management.
 TFTP for uploading/downloading files.
 FTP and HTTP/HTTPS web server for firmware upgrades and uploading/downloading files.
 TCP/IP, UDP/IP, Telnet, SSH, SSL, TCP AES and UDP AES for command/response based
data acquisition application or alarm triggered connection
 HTTP/HTTPS web based monitoring of input readings, chart and data logging
 SMTP AUTH, HTTP/HTTPS Post, FTP/FTPS Put and SNMP Traps for alarm triggered
notification
 SNTP for device clock synchronization
2
1
3