7: Configuration Using Web Manager
xSenso User Guide 46
Live Reading Pages and Configuration Pages
There are five tabs that span the top of the Web Manager page. Beyond the xSenso Home page
accessed through the Home tab at the top left, you may access the other Web Manager pages
through the four other tabs. The Reading, Chart and Logging tab/pages provide live data on the
analog input signals and the Setup and Admin tab/pages provide configuration menus:
Reading: view live readings of analog input, output and relay data.
Chart: view live, customizable charts of analog input, output and relay data.
Logging: view and customize data logs of analog input, output and relay data.
Setup: access the configuration menu to the Action, Analog Input, Analog Output, Relay,
DAQ Format, Email, System and Tunnel configuration pages.
Admin: access the configuration menu to the Status, CLI, Clock, Diagnostics, Discovery,
DNS, Filesystem, FTP, HTTP, Modbus, Network, Protocol Stack, RSS, SMTP, SNMP, SSH,
SSL, Syslog and XML configuration pages.
Figure 7-4 Live Reading vs. Configuration Pages
Configuration Pages
HOME PAGE
Live Reading Pages
To Next Page
Loading...
Need help?
General