xSenso User Guide 28
4: Installation of xSenso 21A2
This chapter describes how to install the xSenso 21A2 device server. It contains the following
sections:
Package Contents
User-Supplied Items
Hardware Components
Hardware Components
Installing the xSenso
Package Contents
The xSenso package includes the following items:
One xSenso 21A2 device
Three 3-contact Terminal Block Plug - screw type for Power Input Port and Analog Output
Ports.
Two 6-contact Terminal Block Plug - screw type for Analog Input Ports
Wall Mount Bracket
Four Rubber Feet
Quick Start Guide
User-Supplied Items
To complete your installation, you need the following items:
Analog devices and sensors that require network connectivity.
Devices to be controlled by analog output.
An available connection to your Ethernet network and an Ethernet cable.
A working AC power outlet if the unit will be powered from an AC power adapter.
A 9-30VDC power supply either terminal screw or barrel input (both may be used
simultaneously for power redundancy)
To Next Page
Loading...
